Get a Quote
For a demo and a quote please contact us
Tel: 01242 236383
E-Mail: info@plastering-machines.co.uk
M-Tec M3 Prof
The m3 can be loaded both with bagged material and with bulk silo material (e.g. in conjunction with m-tec Silo and conveying system F100/140 or hurrican 100/140. For intensive mixing and a higher entrained air content in specific applications, we reco
Mixing pumps / m3 proF
- Applications: masonry mortars, plasters/renders, self-levelling floor screeds, adhesives and reinforcing mortars.
- System/performance: single-stage mixing technique, feed screw, mixing/pumping at 5 -50 l/min, depending on worm pump used. Standard - 22l/min up to 60 m away and 30 m high.
- Feed: bagged or silo materials in conjunction with filter hood or feeding hood.
- Options: filter hood, feeding hood, various worm pumps, after mixer, mixing shaft for insulating plaster, flexible hoses, spray equipment.
arguments for m3 proF
- Automatic phase-sequence detection; the wrong sense of rotation is a typical construction site problem which is now ruled out as a result of the automatic reversing system.
- Fault indication by means of simple, intuitive display
- Easy to use, user-friendly operation using intuitively designed control panel.
- For any machine-processable internal and external plaster mortars as well as for self-levelling floor screeds.
- Easy to assemble and dismantle without any tools.
- Slim shape, fits through almost any door.
- Easy to operate.
- Compact, easy to transport.
- Robust and well suited to construction sites.
- Exchangeable flange for different pump sizes.
- Immediately ready for operation due to full scope of supplies.
- Easy to operate.
Specifications | |
Pumping output: | (5 -50 l/min, depending on worm pump) approx. 22 l/min as standard |
Pumping distance: | up to 40 m |
Pumping height: | up to 20 m |
Pumping pressure: | up to 30 bar |
Geared motor (feed screw): | 0.9 kW, 220/400 V, 50 Hz, 39 rpm |
Geared motor (mixing pump): | 5.5 kW, 220/400 V, 50 Hz, 400 rpm |
Air compressor: | 0.9 kW, approx.250 l/min, 4 bar |
Water pump: | 0,3 kW, ca.40 l / min, 8 bar |
Electrical data: | 400 V, 50 Hz, three-phase, fuse protection: 25 A, plug: 32 A, 5 Pin, 6 h, supply cable:5 x 4.0 mm², current value: 17 A |
Water supply: | ¾" water hose with Geka coupling, required water pressure 2.5 bar min., with the machine running |
Dimensions: | approx. 1,100 x 700 x 1,050mm |
Filling height for bagged material: | approx. 950 mm |
Weight: | approx. 220 kg (without accessories) |